dmesg - intrepid xfs
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.1.15-8-default (geeko@buildhost) (gcc version 4.8.5 (SUSE Linux) ) #1 SMP PREEMPT Wed Jan 20 16:41:00 UTC 2016 (0e3b3ab)
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009a3ff] usable
BIOS-e820: [mem 0x000000000009a400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000be7a4fff] usable
BIOS-e820: [mem 0x00000000be7a5000-0x00000000be7f0fff] ACPI NVS
BIOS-e820: [mem 0x00000000be7f1000-0x00000000be7f8fff] ACPI data
BIOS-e820: [mem 0x00000000be7f9000-0x00000000bf476fff] reserved
BIOS-e820: [mem 0x00000000bf477000-0x00000000bf477fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf478000-0x00000000bf488fff] reserved
BIOS-e820: [mem 0x00000000bf489000-0x00000000bf48bfff] ACPI NVS
BIOS-e820: [mem 0x00000000bf48c000-0x00000000bf4acfff] reserved
BIOS-e820: [mem 0x00000000bf4ad000-0x00000000bf4aefff] usable
BIOS-e820: [mem 0x00000000bf4af000-0x00000000bf502fff] reserved
BIOS-e820: [mem 0x00000000bf503000-0x00000000bf50cfff] ACPI NVS
BIOS-e820: [mem 0x00000000bf50d000-0x00000000bf532fff] reserved
BIOS-e820: [mem 0x00000000bf533000-0x00000000bf575fff] ACPI NVS
BIOS-e820: [mem 0x00000000bf576000-0x00000000bf7fffff] usable
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Supermicro X9SCL/X9SCM/X9SCL/X9SCM, BIOS 1.1a 09/28/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CBFFF write-protect
CC000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 400000000 mask FC0000000 write-back
2 base 0C0000000 mask FC0000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fce00-0x000fce0f] mapped at [ffff8800000fce00]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000094000] 94000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x0221a000, 0x0221afff] PGTABLE
BRK [0x0221b000, 0x0221bfff] PGTABLE
BRK [0x0221c000, 0x0221cfff] PGTABLE
init_memory_mapping: [mem 0x43fe00000-0x43fffffff]
[mem 0x43fe00000-0x43fffffff] page 2M
BRK [0x0221d000, 0x0221dfff] PGTABLE
init_memory_mapping: [mem 0x420000000-0x43fdfffff]
[mem 0x420000000-0x43fdfffff] page 2M
init_memory_mapping: [mem 0x00100000-0xbe7a4fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbe5fffff] page 2M
[mem 0xbe600000-0xbe7a4fff] page 4k
init_memory_mapping: [mem 0xbf4ad000-0xbf4aefff]
[mem 0xbf4ad000-0xbf4aefff] page 4k
BRK [0x0221e000, 0x0221efff] PGTABLE
init_memory_mapping: [mem 0xbf576000-0xbf7fffff]
[mem 0xbf576000-0xbf5fffff] page 4k
[mem 0xbf600000-0xbf7fffff] page 2M
init_memory_mapping: [mem 0x100000000-0x41fffffff]
[mem 0x100000000-0x41fffffff] page 2M
BRK [0x0221f000, 0x0221ffff] PGTABLE
RAMDISK: [mem 0x3702c000-0x3780dfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0450 000024 (v02 SUPERM)
ACPI: XSDT 0x00000000BE7F1080 00007C (v01 SUPERM SMCI--MB 00000001 AMI 00010013)
ACPI: FACP 0x00000000BE7F7F48 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013)
ACPI: DSDT 0x00000000BE7F1188 006DC0 (v02 SUPERM SMCI--MB 00000000 INTL 20051117)
ACPI: FACS 0x00000000BF50AF80 000040
ACPI: APIC 0x00000000BE7F8040 000092 (v03 SUPERM SMCI--MB 00000001 AMI 00010013)
ACPI: SSDT 0x00000000BE7F80D8 0001D6 (v01 AMICPU PROC 00000001 MSFT 03000001)
ACPI: MCFG 0x00000000BE7F82B0 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097)
ACPI: HPET 0x00000000BE7F82F0 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000004)
ACPI: SPMI 0x00000000BE7F8328 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000)
ACPI: DMAR 0x00000000BE7F8368 0000B0 (v01 ALASKA A M I 00000001 INTL 00000001)
ACPI: EINJ 0x00000000BE7F8418 000130 (v01 AMI AMI EINJ 00000000 00000000)
ACPI: ERST 0x00000000BE7F8548 000210 (v01 AMIER AMI ERST 00000000 00000000)
ACPI: HEST 0x00000000BE7F8758 0000A8 (v01 AMI AMI HEST 00000000 00000000)
ACPI: BERT 0x00000000BE7F8800 000030 (v01 AMI AMI BERT 00000000 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000043fffffff]
NODE_DATA(0) allocated [mem 0x43ffde000-0x43fff1fff]
[ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042f600000-ffff88043f5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000043fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000099fff]
node 0: [mem 0x0000000000100000-0x00000000be7a4fff]
node 0: [mem 0x00000000bf4ad000-0x00000000bf4aefff]
node 0: [mem 0x00000000bf576000-0x00000000bf7fffff]
node 0: [mem 0x0000000100000000-0x000000043fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000043fffffff]
On node 0 totalpages: 4188618
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3993 pages, LIFO batch:0
DMA32 zone: 12137 pages used for memmap
DMA32 zone: 776753 pages, LIFO batch:31
Normal zone: 53248 pages used for memmap
Normal zone: 3407872 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xbe7a5000-0xbe7f0fff]
PM: Registered nosave memory: [mem 0xbe7f1000-0xbe7f8fff]
PM: Registered nosave memory: [mem 0xbe7f9000-0xbf476fff]
PM: Registered nosave memory: [mem 0xbf477000-0xbf477fff]
PM: Registered nosave memory: [mem 0xbf478000-0xbf488fff]
PM: Registered nosave memory: [mem 0xbf489000-0xbf48bfff]
PM: Registered nosave memory: [mem 0xbf48c000-0xbf4acfff]
PM: Registered nosave memory: [mem 0xbf4af000-0xbf502fff]
PM: Registered nosave memory: [mem 0xbf503000-0xbf50cfff]
PM: Registered nosave memory: [mem 0xbf50d000-0xbf532fff]
PM: Registered nosave memory: [mem 0xbf533000-0xbf575fff]
PM: Registered nosave memory: [mem 0xbf800000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xbf800000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88043fc00000 s97368 r8192 d29608 u262144
pcpu-alloc: s97368 r8192 d29608 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4123148
Policy zone: Normal
log_buf_len individual max cpu contribution: 32768 bytes
log_buf_len total cpu_extra contributions: 229376 bytes
log_buf_len min size: 262144 bytes
log_buf_len: 524288 bytes
early log buf free: 250672(95%)
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
Memory: 16397604K/16754472K available (6547K kernel code, 1084K rwdata, 4848K rodata, 1560K init, 1516K bss, 356868K reserved, 0K cma-reserved)
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:488 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
Console: colour dummy device 80x25
console [tty0] enabled
clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3192.812 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.62 BogoMIPS (lpj=12771248)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150410
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 24K (ffffffff82097000 - ffffffff8209d000)
ftrace: allocating 25000 entries in 98 pages
dmar: Host address width 36
dmar: DRHD base: 0x000000fed91000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
dmar: RMRR base: 0x000000bf495000 end: 0x000000bf4a3fff
IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 0
HPET id 0 under DRHD base 0xfed91000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Xeon(R) CPU E31230 @ 3.20GHz (fam: 06, model: 2a, stepping: 07)
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (51084.99 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xbe7a5000-0xbe7f0fff] (311296 bytes)
PM: Registering ACPI NVS region [mem 0xbf477000-0xbf477fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0xbf489000-0xbf48bfff] (12288 bytes)
PM: Registering ACPI NVS region [mem 0xbf503000-0xbf50cfff] (40960 bytes)
PM: Registering ACPI NVS region [mem 0xbf533000-0xbf575fff] (274432 bytes)
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 23:59:21, date: 05/03/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88042CCE7000 00086C (v01 AMI IST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88042CCB3600 0001A4 (v01 AMI CST 00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20150410/hwxface-580)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff window]
pci 0000:00:00.0: [8086:0108] type 00 class 0x060000
pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfbb00000-0xfbb1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfbb24000-0xfbb24fff]
pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfbb23000-0xfbb233ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbb22000-0xfbb223ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c54] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbb21000-0xfbb217ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbb20000-0xfbb200ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f]
pci 0000:01:00.0: [15b3:673c] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0xfba00000-0xfbafffff 64bit]
pci 0000:01:00.0: reg 0x18: [mem 0xff000000f8000000-0xff000000f9ffffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:10d3] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xfb900000-0xfb91ffff]
pci 0000:03:00.0: reg 0x18: [io 0xe000-0xe01f]
pci 0000:03:00.0: reg 0x1c: [mem 0xfb920000-0xfb923fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:04:03.0: [102b:0532] type 00 class 0x030000
pci 0000:04:03.0: reg 0x10: [mem 0xfa000000-0xfaffffff pref]
pci 0000:04:03.0: reg 0x14: [mem 0xfb800000-0xfb803fff]
pci 0000:04:03.0: reg 0x18: [mem 0xfb000000-0xfb7fffff]
pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff]
pci 0000:00:1e.0: bridge window [mem 0xfa000000-0xfaffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfbffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: Enabled 3 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:04:03.0
vgaarb: device added: PCI:0000:04:03.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:04:03.0
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:01:00.0: can't claim BAR 2 [mem 0xff000000f8000000-0xff000000f9ffffff 64bit pref]: no compatible bridge window
e820: reserve RAM buffer [mem 0x0009a400-0x0009ffff]
e820: reserve RAM buffer [mem 0xbe7a5000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf4af000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x0a00-0x0a1f] has been reserved
system 00:03: [io 0x0a30-0x0a3f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:08: [io 0x0b00-0x0b7f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0a: [io 0x0400-0x0453] could not be reserved
system 00:0a: [io 0x0458-0x047f] has been reserved
system 00:0a: [io 0x1180-0x119f] has been reserved
system 00:0a: [io 0x0500-0x057f] has been reserved
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:0b: [io 0x0454-0x0457] has been reserved
system 00:0b: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp: PnP ACPI: found 12 devices
clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:01:00.0: BAR 2: assigned [mem 0xf8000000-0xf9ffffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [mem 0xfba00000-0xfbafffff]
pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf9ffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.4: PCI bridge to [bus 03]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:1e.0: PCI bridge to [bus 04]
pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff]
pci 0000:00:1e.0: bridge window [mem 0xfa000000-0xfaffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xf0000000-0xfbffffff window]
pci_bus 0000:01: resource 1 [mem 0xfba00000-0xfbafffff]
pci_bus 0000:01: resource 2 [mem 0xf8000000-0xf9ffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:04: resource 1 [mem 0xfb000000-0xfb8fffff]
pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfaffffff 64bit pref]
pci_bus 0000:04: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:04: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:04: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:04: resource 10 [mem 0xf0000000-0xfbffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:04:03.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 8072K (ffff88003702c000 - ffff88003780e000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xba7a5000-0xbe7a5000] (64MB) mapped at [ffff8800ba7a5000-ffff8800be7a4fff]
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
hw unit of domain pp0-core 2^-16 Joules
hw unit of domain package 2^-16 Joules
hw unit of domain pp1-gpu 2^-16 Joules
microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x1b
microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x1b
microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x1b
microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x1b
microcode: CPU4 sig=0x206a7, pf=0x2, revision=0x1b
microcode: CPU5 sig=0x206a7, pf=0x2, revision=0x1b
microcode: CPU6 sig=0x206a7, pf=0x2, revision=0x1b
microcode: CPU7 sig=0x206a7, pf=0x2, revision=0x1b
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1462319961.948:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xfa000000, mapped to 0xffffc90001c00000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ERST: Can not request [mem 0xbf48903f-0xbf48b03e] for ERST.
[Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled.
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
00:09: ttyS2 at I/O 0x3e8 (irq = 10, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21100 irq 28
ata2: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21180 irq 28
ata3: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21200 irq 28
ata4: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21280 irq 28
ata5: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21300 irq 28
ata6: SATA max UDMA/133 abar m2048@0xfbb21000 port 0xfbb21380 irq 28
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
NET: Registered protocol family 10
registered taskstats version 1
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 0:103:1009
rtc_cmos 00:01: setting system clock to 2016-05-03 23:59:22 UTC (1462319962)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7: INTEL SSDSA2VP020G2, 2CV102M5, max UDMA/133
ata1.00: 39091248 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2VP02 02M5 PQ: 0 ANSI: 5
ata4.00: ATA-8: TOSHIBA DT01ACA300, MX6OABB0, max UDMA/133
ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] 39091248 512-byte logical blocks: (20.0 GB/18.6 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: Enabling discard_zeroes_data
ata4.00: configured for UDMA/133
sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] Attached SCSI disk
ata5.00: ATA-10: WDC WD6001FZWX-00A2VA0, 01.01A01, max UDMA/133
ata5.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2: SATA link down (SStatus 0 SControl 300)
scsi 3:0:0:0: Direct-Access ATA TOSHIBA DT01ACA3 ABB0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
sd 3:0:0:0: [sdb] 4096-byte physical blocks
sd 3:0:0:0: [sdb] Write Protect is off
sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access ATA WDC WD6001FZWX-0 1A01 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdc] 11721045168 512-byte logical blocks: (6.00 TB/5.45 TiB)
sd 4:0:0:0: [sdc] 4096-byte physical blocks
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2
sd 3:0:0:0: [sdb] Attached SCSI disk
sdc: sdc1
sd 4:0:0:0: [sdc] Attached SCSI disk
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1560K (ffffffff81f11000 - ffffffff82097000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1632K (ffff880001668000 - ffff880001800000)
Freeing unused kernel memory: 1296K (ffff880001cbc000 - ffff880001e00000)
random: systemd urandom read with 23 bits of entropy available
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
systemd[1]: Failed to start Load Kernel Modules.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbb23000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.1.15-8-default ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbb22000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.1.15-8-default ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
raid6: sse2x1 gen() 8077 MB/s
raid6: sse2x1 xor() 7420 MB/s
tsc: Refined TSC clocksource calibration: 3192.748 MHz
clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x2e05875245f, max_idle_ns: 440795336287 ns
raid6: sse2x2 gen() 11617 MB/s
raid6: sse2x2 xor() 8318 MB/s
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
raid6: sse2x4 gen() 13368 MB/s
raid6: sse2x4 xor() 10064 MB/s
raid6: using algorithm sse2x4 gen() 13368 MB/s
raid6: .... xor() 10064 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: automatically using best checksumming function:
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 6 ports detected
avx : 25335.000 MB/sec
Btrfs loaded, assert=on
BTRFS: device fsid 62be23d7-d5c5-4f5d-b781-7cbd0683c34e devid 1 transid 68183212 /dev/sda1
BTRFS info (device sda1): disk space caching is enabled
BTRFS: detected SSD devices, enabling SSD mode
usb 1-1.2: new full-speed USB device number 3 using ehci-pci
usb 1-1.2: New USB device found, idVendor=0557, idProduct=2221
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: Hermon USB hidmouse Device
usb 1-1.2: Manufacturer: Winbond Electronics Corp
BTRFS info (device sda1): disk space caching is enabled
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xe4 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
random: nonblocking pool is initialized
ipmi_si: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: Power Button [PWRF]
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
input: PC Speaker as /devices/platform/pcspkr/input/input5
EDAC MC: Ver: 3.0.0
PTP clock support registered
ACPI Warning: SystemIO range 0x0000000000001180-0x000000000000119F conflicts with OpRegion 0x0000000000001180-0x000000000000119F (\_SB_.PCI0.SMB_.SMIO) (20150410/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
device-mapper: uevent: version 1.0.3
ipmi device interface
device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
mlx4_core: Mellanox ConnectX core driver v2.2-1 (Feb, 2014)
mlx4_core: Initializing 0000:01:00.0
gpio_ich: GPIO from 436 to 511 on gpio_ich
iTCO_vendor_support: vendor-support=0
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0557:2221.0001/input/input6
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input0
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:0557:2221.0002/input/input7
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[drm] Initialized drm 1.1.0 20060810
Switched to clocksource tsc
checking generic (fa000000 130000) vs hw (fa000000 1000000)
fb: switching to mgag200drmfb from VESA VGA
Console: switching to colour dummy device 80x25
[TTM] Zone kernel: Available graphics memory: 8205094 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input1
fbcon: mgadrmfb (fb0) is primary device
Console: switching to colour frame buffer device 128x48
ipmi_si ipmi_si.0: Found new BMC (man_id: 0x002a7c, prod_id: 0x0624, dev_id: 0x20)
ipmi_si ipmi_si.0: IPMI kcs interface initialized
mgag200 0000:04:03.0: fb0: mgadrmfb frame buffer device
mgag200 0000:04:03.0: registered panic notifier
[drm] Initialized mgag200 1.0.0 20110418 for 0000:04:03.0 on minor 0
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:56:cf:81
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
e1000e 0000:03:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
EDAC MC0: Giving out device to module ie31200_edac controller IE31200: DEV 0000:00:00.0 (POLLED)
e1000e 0000:03:00.0 eth1: registered PHC clock
e1000e 0000:03:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:56:cf:80
e1000e 0000:03:00.0 eth1: Intel(R) PRO/1000 Network Connection
e1000e 0000:03:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
systemd-journald[441]: File /var/log/journal/6f56498524414a5f9a36a0f3673b5148/system.journal corrupted or uncleanly shut down, renaming and replacing.
SGI XFS with ACLs, security attributes, realtime, no debug enabled
XFS (sdb1): Mounting V4 Filesystem
XFS (sdb1): Ending clean mount
mlx4_core 0000:01:00.0: PCIe link speed is 5.0GT/s, device supports 5.0GT/s
mlx4_core 0000:01:00.0: PCIe link width is x8, device supports x8
mlx4_ib_add: mlx4_ib: Mellanox ConnectX InfiniBand driver v2.2-1 (Feb 2014)
audit: type=1305 audit(1462320084.848:2): audit_pid=1221 old=0 auid=4294967295 ses=4294967295 res=1
No iBFT detected.
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
ib0: enabling connected mode will cause multicast packet drops
ib0: mtu > 4092 will cause multicast packet drops.
IPv6: ADDRCONF(NETDEV_UP): ib0: link is not ready
device eth0 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): ib0: link becomes ready
ib0: sendonly multicast join failed for ff12:601b:ffff:0000:0000:0000:0000:0016, status -22
NET: Registered protocol family 17
ib0: sendonly multicast join failed for ff12:401b:ffff:0000:0000:0000:0000:0016, status -22
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
ib0: sendonly multicast join failed for ff12:601b:ffff:0000:0000:0000:0000:0002, status -22
ib0: sendonly multicast join failed for ff12:601b:ffff:0000:0000:0000:0000:0016, status -22
ib0: sendonly multicast join failed for ff12:401b:ffff:0000:0000:0000:0000:0016, status -22
ib0: sendonly multicast join failed for ff12:601b:ffff:0000:0000:0000:0000:0016, status -22
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
br0: port 1(eth0) entered forwarding state
br0: port 1(eth0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
ib0: sendonly multicast join failed for ff12:601b:ffff:0000:0000:0000:0000:0002, status -22
ib0: sendonly multicast join failed for ff12:601b:ffff:0000:0000:0000:0000:0016, status -22
ib0: sendonly multicast join failed for ff12:601b:ffff:0000:0000:0000:0000:0002, status -22
ib0: sendonly multicast join failed for ff12:601b:ffff:0000:0000:0000:0000:0002, status -22
ib0: sendonly multicast join failed for ff12:601b:ffff:0000:0000:0000:0000:0002, status -22
ib0: sendonly multicast join failed for ff12:601b:ffff:0000:0000:0000:0000:0002, status -22
ib0: sendonly multicast join failed for ff12:401b:ffff:0000:0000:0000:0000:0016, status -22
ib0: sendonly multicast join failed for ff12:401b:ffff:0000:0000:0000:0000:0016, status -22
XFS (sdc1): Mounting V4 Filesystem
XFS (sdc1): Ending clean mount
XFS (sdc1): Unmounting Filesystem
XFS (sdc1): Mounting V4 Filesystem
XFS (sdc1): Ending clean mount
XFS (sdc1): Unmounting Filesystem
XFS (sdc1): Mounting V4 Filesystem
XFS (sdc1): Ending clean mount
XFS (sdc1): Unmounting Filesystem
XFS (sdc1): Mounting V4 Filesystem
XFS (sdc1): Ending clean mount
XFS (sdc1): Unmounting Filesystem
ata3: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xe frozen
ata3: irq_stat 0x00400040, connection status changed
ata3: SError: { PHYRdyChg CommWake DevExch }
ata3: hard resetting link
ata3: link is slow to respond, please be patient (ready=0)
ata3: COMRESET failed (errno=-16)
ata3: hard resetting link
ata3: link is slow to respond, please be patient (ready=0)
ata3: COMRESET failed (errno=-16)
ata3: hard resetting link
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD1501FASS-00W2B0, 05.01D05, max UDMA/133
ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
ata3: EH complete
scsi 2:0:0:0: Direct-Access ATA WDC WD1501FASS-0 1D05 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg3 type 0
sd 2:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 2:0:0:0: [sdd] Write Protect is off
sd 2:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1 sdd2
sd 2:0:0:0: [sdd] Attached SCSI disk
BTRFS: device fsid c205428b-4b9d-42b0-bba5-3da9a6ee25ac devid 1 transid 24565 /dev/sdd
BTRFS: device fsid 784fb17d-7908-4f94-9d8e-cce2125e8d5e devid 1 transid 1994699 /dev/sdd1
BTRFS info (device sdd1): disk space caching is enabled
BTRFS: has skinny extents
XFS (sdc1): Mounting V4 Filesystem
XFS (sdc1): Ending clean mount
XFS (sdc1): Unmounting Filesystem
XFS (sdc1): Mounting V4 Filesystem
XFS (sdc1): Ending clean mount
XFS (sdc1): Unmounting Filesystem
XFS (sdc1): Mounting V4 Filesystem
XFS (sdc1): Ending clean mount
XFS (sdc1): Unmounting Filesystem
XFS (sdc1): Mounting V4 Filesystem
XFS (sdc1): Ending clean mount
XFS (sdc1): Unmounting Filesystem
XFS (sdc1): Mounting V4 Filesystem
XFS (sdc1): Ending clean mount
XFS (sdc1): Unmounting Filesystem
XFS (sdc1): Mounting V4 Filesystem
XFS (sdc1): Ending clean mount
XFS (sdc1): Unmounting Filesystem
XFS (sdc1): Mounting V4 Filesystem
XFS (sdc1): Ending clean mount
XFS (sdc1): Unmounting Filesystem
XFS (sdc1): Mounting V4 Filesystem
XFS (sdc1): Ending clean mount
XFS (sdc1): Unmounting Filesystem
XFS (sdc1): Mounting V4 Filesystem
XFS (sdc1): Ending clean mount
perf interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Process accounting resumed
Process accounting resumed
Process accounting resumed
Key type ceph registered
libceph: loaded (mon/osd proto 15/24)
rbd: loaded
libceph: client17954139 fsid 36498aca-b246-473b-8e32-c12fb63fdd15
libceph: mon0 10.7.42.50:6789 session established
rbd: rbd0: added with size 0x500000000
XFS (rbd0): Mounting V4 Filesystem
XFS (rbd0): Ending clean mount
device vethOKOTG7 entered promiscuous mode
IPv6: ADDRCONF(NETDEV_UP): vethOKOTG7: link is not ready
eth0: renamed from vethDGAB5C
IPv6: ADDRCONF(NETDEV_CHANGE): vethOKOTG7: link becomes ready
br0: port 2(vethOKOTG7) entered forwarding state
br0: port 2(vethOKOTG7) entered forwarding state
libceph: osd5 down
libceph: osd11 down
libceph: osd12 down
libceph: osd13 down
libceph: osd5 up
libceph: osd12 up
libceph: osd11 up
libceph: osd13 up
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd5 10.7.42.54:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
ata3.00: exception Emask 0x0 SAct 0x1800000 SErr 0x0 action 0x0
ata3.00: irq_stat 0x40000008
ata3.00: failed command: READ FPDMA QUEUED
ata3.00: cmd 60/40:b8:28:3a:3d/05:00:10:00:00/40 tag 23 ncq 688128 in
res 41/40:00:2c:3a:3d/00:00:10:00:00/40 Emask 0x409 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
sd 2:0:0:0: [sdd] tag#23 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 2:0:0:0: [sdd] tag#23 Sense Key : Medium Error [current] [descriptor]
sd 2:0:0:0: [sdd] tag#23 Add. Sense: Unrecovered read error - auto reallocate failed
sd 2:0:0:0: [sdd] tag#23 CDB: Read(10) 28 00 10 3d 3a 28 00 05 40 00
blk_update_request: I/O error, dev sdd, sector 272448044
BTRFS: bdev /dev/sdd1 errs: wr 0, rd 1, flush 0, corrupt 0, gen 0
ata3: EH complete
ata3.00: exception Emask 0x0 SAct 0x40 SErr 0x0 action 0x0
ata3.00: irq_stat 0x40000008
ata3.00: failed command: READ FPDMA QUEUED
ata3.00: cmd 60/08:30:28:3a:3d/00:00:10:00:00/40 tag 6 ncq 4096 in
res 41/40:00:2c:3a:3d/00:00:10:00:00/40 Emask 0x409 (media error)
ata3.00: status: { DRDY ERR }
ata3.00: error: { UNC }
ata3.00: configured for UDMA/133
sd 2:0:0:0: [sdd] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sd 2:0:0:0: [sdd] tag#6 Sense Key : Medium Error [current] [descriptor]
sd 2:0:0:0: [sdd] tag#6 Add. Sense: Unrecovered read error - auto reallocate failed
sd 2:0:0:0: [sdd] tag#6 CDB: Read(10) 28 00 10 3d 3a 28 00 00 08 00
blk_update_request: I/O error, dev sdd, sector 272448044
BTRFS: bdev /dev/sdd1 errs: wr 0, rd 2, flush 0, corrupt 0, gen 0
ata3: EH complete
libceph: osd1 down
libceph: osd1 weight 0x0 (out)
libceph: mon0 10.7.42.50:6789 socket closed (con state OPEN)
libceph: mon0 10.7.42.50:6789 session lost, hunting for new mon
libceph: mon2 10.7.42.52:6789 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: mon1 10.7.42.51:6789 socket closed (con state OPEN)
libceph: mon2 10.7.42.52:6789 session established
libceph: mon2 10.7.42.52:6789 socket closed (con state OPEN)
libceph: mon2 10.7.42.52:6789 session lost, hunting for new mon
libceph: mon2 10.7.42.52:6789 session established
libceph: mon2 10.7.42.52:6789 socket closed (con state OPEN)
libceph: mon2 10.7.42.52:6789 session lost, hunting for new mon
libceph: mon2 10.7.42.52:6789 session established
libceph: mon2 10.7.42.52:6789 socket closed (con state OPEN)
libceph: mon2 10.7.42.52:6789 session lost, hunting for new mon
libceph: mon2 10.7.42.52:6789 session established
libceph: mon2 10.7.42.52:6789 socket closed (con state OPEN)
libceph: mon2 10.7.42.52:6789 session lost, hunting for new mon
libceph: mon2 10.7.42.52:6789 session established
libceph: mon2 10.7.42.52:6789 socket closed (con state OPEN)
libceph: mon2 10.7.42.52:6789 session lost, hunting for new mon
libceph: mon0 10.7.42.50:6789 socket closed (con state OPEN)
libceph: mon2 10.7.42.52:6789 session established
libceph: mon2 10.7.42.52:6789 socket closed (con state OPEN)
libceph: mon2 10.7.42.52:6789 session lost, hunting for new mon
libceph: mon1 10.7.42.51:6789 session established
libceph: mon1 10.7.42.51:6789 socket closed (con state OPEN)
libceph: mon1 10.7.42.51:6789 session lost, hunting for new mon
libceph: mon2 10.7.42.52:6789 session established
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd5 10.7.42.54:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
ata2: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xe frozen
ata2: irq_stat 0x00400040, connection status changed
ata2: SError: { PHYRdyChg CommWake DevExch }
ata2: hard resetting link
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-9: OCZ INTREPID 3800, 1.4.6.6, max UDMA/133
ata2.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata2: EH complete
scsi 1:0:0:0: Direct-Access ATA OCZ INTREPID 380 6.6 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg4 type 0
sd 1:0:0:0: [sde] 390721968 512-byte logical blocks: (200 GB/186 GiB)
sd 1:0:0:0: [sde] 4096-byte physical blocks
sd 1:0:0:0: [sde] Write Protect is off
sd 1:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sde] Attached SCSI disk
sde: sde1
XFS (sde1): Mounting V4 Filesystem
XFS (sde1): Ending clean mount
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd6 10.7.42.51:6808 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
libceph: osd15 10.7.42.51:6800 socket closed (con state OPEN)
python (21228): drop_caches: 3
python (21228): drop_caches: 3
python (21434): drop_caches: 3
python (21434): drop_caches: 3
python (21707): drop_caches: 3
python (21707): drop_caches: 3